Glanwell Engineered Natural Oak Brushed and Oiled 150mm x 14/3mm Wood Flooring
Out of stock
Product Code
150143BO1
Key Features
Product Code: 150143BO1Description
Product Code: 150143BO1
Glanwell Engineered Natural Oak Brushed and Oiled 150mm x 14/3mm Wood Flooring
A fantastic Natural Oak engineered wood flooring. Each individual board is 150mm (15cm), the overall thickness of the plank is 14mm (1.4cm), including a top 3mm layer of Oak veneer. The 3mm wear layer enables you to sand down and refinish the surface up to 2 times. This shouldn’t be necessary for the first 10-15 years in most domestic environments. Engineered flooring, such as this, is highly resilient to temperature and humidity changes meaning they can be laid in most rooms in the home, including conservatories, with the only exception being the bathroom. Due to the stability of our engineered flooring products laying the flooring in rooms heated with water based underfloor heating is not a problem. Each board is manufactured with a tongue and groove profile, so each board can simply be glued together. The grade of this Oak is mixed, meaning it will contain some knots as is typical with Oak products.
This engineered Oak would usually be fitted as a floating floor installation, where a 3mm underlay is laid onto the subfloor beneath the flooring, this gives added protection from any damp and will act as a sound barrier and insulator. Our 4mm Compressed Rubber Underlay is suitable for water based underfloor heating. An oiled finish is not impermeable and may not be suitable for spillages. This product comes in mixed lengths.
Industry standard for wastage and cut offs is 10%, with 5% for visual grading. This should be factored into your calculations when ordering.
A fantastic Natural Oak engineered wood flooring. Each individual board is 150mm (15cm), the overall thickness of the plank is 14mm (1.4cm), including a top 3mm layer of Oak veneer. The 3mm wear layer enables you to sand down and refinish the surface up to 2 times. This shouldn’t be necessary for the first 10-15 years in most domestic environments. Engineered flooring, such as this, is highly resilient to temperature and humidity changes meaning they can be laid in most rooms in the home, including conservatories, with the only exception being the bathroom. Due to the stability of our engineered flooring products laying the flooring in rooms heated with water based underfloor heating is not a problem. Each board is manufactured with a tongue and groove profile, so each board can simply be glued together. The grade of this Oak is mixed, meaning it will contain some knots as is typical with Oak products.
This engineered Oak would usually be fitted as a floating floor installation, where a 3mm underlay is laid onto the subfloor beneath the flooring, this gives added protection from any damp and will act as a sound barrier and insulator. Our 4mm Compressed Rubber Underlay is suitable for water based underfloor heating. An oiled finish is not impermeable and may not be suitable for spillages. This product comes in mixed lengths.
Industry standard for wastage and cut offs is 10%, with 5% for visual grading. This should be factored into your calculations when ordering.
Specifications
| Product Code | 150143BO1 |
|---|---|
| Finish | Brushed & Oiled |
| Wood Species | Oak |
| Veneer | 3mm |
| Grade | Mixed |
| Thickness | 14mm |
| Wear Layer | 3mm |
| Width | 150mm |
| Width Category | STANDARD (101mm-150mm) |
| Installation Method | Tongue & Groove |
| Length | 300mm-1200mm Mixed Length |
| Range | Glanwell |
| Pack Coverage | 1 pack covers 2.88 m² |
Customer Questions
- What is engineered wood flooring?
- Do I need to acclimatise my wood flooring before fitting?
- Can I install wood flooring over underfloor heating?
- Do I need expansion gaps when fitting wood flooring?
- Can engineered wood flooring be sanded?
- Read 10 More Questions
What is engineered wood flooring?
Engineered wood is real wood on top, with stable layers beneath.
Do I need to acclimatise my wood flooring before fitting?
Yes, you must acclimatise your wood flooring before installation. For engineered wood, allow 48–72 hours; for solid wood, give it at least 7 days. Keep the packs flat, unopened, and in a room with stable conditions.
Can I install wood flooring over underfloor heating?
Yes, you can install wood flooring over underfloor heating—but it must be a water-based system. Never use electric underfloor heating with wood flooring, as it can overheat and damage the boards.
Do I need expansion gaps when fitting wood flooring?
Yes, always leave an expansion gap of 10–15mm around the perimeter of your wood flooring. This allows the wood to expand and contract naturally with changes in temperature and humidity.
Can engineered wood flooring be sanded?
Yes, engineered wood flooring can be sanded, but only if the top wear layer is thick enough—usually at least 3mm. Thinner layers may not allow for sanding without damage.
Similar Products:
Write Your Own Review
Please complete your information below to login.